Part# 7062
Passive part of the QRF buckle. You can adjust the length of the strap by pulling on the loose end. The loose end of the strap should be bent twice and sewn through to prevent its unintended unthreadi...
Part# 8009
A replacement connection hose for use with the professional, standard, or inflator flow limiter. It is meant for a cylindrical low-pressure connection with a diameter of 5.8 mm.
Part# 3001
Oxygen sensor Divesoft type 22S with a three pin Molex connector. It is designed as a spare part for the Divesoft analyzer, but it can also be used for other apparatuses. Range 0–100%. The sensor’...
Part# 8438
Simple connector to the DIN G5/8 valve. The connection is placed into the gas input port of the analyzer and pushed against the cylinder valve. Gas flow is regulated using the cylinder valve. It is su...
Part# 8451
Analyzer Set Blender Pro was compiled for divers and filling stations, which prepare Nitrox and Trimix gas mixtures. The analyzer can measure resistance and voltage and can be stored in the supplied w...
Part# 8437
PROFESSIONAL FLOW LIMITER MK2 DIN G5/8The Professional flow limiter Mk2 is equipped with a regulator that reduces the gas to flow at a constant rate regardless of the cylinder pressure. This enables t...
